Advertisement
• Download Font
Notes
The "DOWNLOAD FONT" menu appears only in the HP LaserJet 4+
emulation mode.
Be sure to print out the list of download fonts with the TEST switch and
check the download font ID on the list before you enter this menu. You
need to select the font in this menu with the same number you see on the
list.
If you have downloaded a font into the printer memory, you can save it on
the flash memory card or the HDD card.
The printer prompts you to select the download font ID that you can find
from the font list. Press the SET switch to move the cursor to the ID and
select it with the
or
FONT ID=#####
Note
The download font IDs do not appear when fonts have not been
downloaded.
After you select the download font ID, press the SET switch, so that the
printer saves the selected download font. Vector or bitmapped fonts are
saved in the format of the original font.
Once you save the download font in the card, you do not need to download
the font every time you need it.
Since the flash memory card or the HDD card is in the upper card slot A of
the printer, you can select the saved fonts as "SLOTFONT A" with the
FONT switch or the font selection command from your software. For font
selection, see
"FONT Switch" in Chapter 4.
You can check the fonts saved on the card by printing the list of fonts with
the TEST switch. See
"TEST Switch" in Chapter
Note
When the fonts on the HDD card are selected in a print job, they are copied
into the printer RAM. It may tend to cause the printer memory full error
because those fonts occupy some RAM space. It is recommended to install
optional SIMM to use the downloaded fonts on the HDD card.
switch.
CHAPTER 4 CONTROL PANEL
4.
4–39
Advertisement
Chapters
Troubleshooting
