Paper Feed Chassis Unit - Brother HL-1260 Service Manual

Brother laser printer service manual

Hide thumbs Also See for HL-1260:

1.12 Paper Feed Chassis Unit

(1) Pull out the unit by loosening the 8 screws (4 screws for front and 4 screws for bottom).

Note: When installing the paper feed chassis unit, screw the left chassis of this paper feed chassis unit,

set the paper tray, displace the right chassis of this unit up to the paper tray and screw them.

(2) Remove the paper hold front and paper hold rear by pinching the pawl of the paper hold front

with pliers.

Paper hold rear

(3) Release the left cartridge hold roller and remove the cartridge guide L (by loosening the screw

and releasing the hook) then pull out feed flat cable 20P.

Feed flat cable 20P

Paper feed chassis unit

Paper hold front

Cartridge hold roller

Cartridge guide L

Hook (the rear side)