Brother HL-1260 Service Manual page 387

Clean the printer interior as follows:
1. Turn off the printer and unplug the power cord.
2. Open the top cover of the printer and remove the toner cartridge.
3. Clean both sides of the paper access cover and transfer guide by wiping
off toner and paper particles with a dry, soft cloth. The paper access
cover can be lifted up to allow easier access for cleaning.
Fig. 6-6 Cleaning the Paper Access Cover
and Transfer Guide
4. Wipe off toner and paper particles from the top surface of the black
plastic paper guide with a dry, soft cloth.
Fig. 6-7 Cleaning the Paper Guide
5. Detach the cleaning brush from the top cover and clean the anti-static
teeth by sliding the brush several times. After cleaning, replace the
brush in its slot.
6. Refit the toner cartridge as described in
CARTRIDGE.
7. Close the top cover of the printer and plug in the power cord.
CHAPTER 6 MAINTENANCE
Transfer Guide
Paper Access Cover
Paper Guide
REPLACING THE TONER
6–7