Brother HL-1260 Service Manual page 329

USER'S GUIDE
SECONDARY FONT
4–50
SELECT FONT
SYMBOL SET
TABLE PRINT
exit
To select the font and symbol set in the HP LaserJet 4+ mode, follow these
steps:
1. Press the SEL switch to set the printer off-line.
2. Press the FONT switch.
The display shows the following menu.
PRIMARY FONT
3. Press the or switch to select the primary or secondary font setting
menu.
PRIMARY FONT
SECONDARY FONT
For this session, select the primary font setting menu.
4. Press the SET switch.
The display shows the font setting menu. You can skip the font setting
menu and advance to the symbol set setting menu with the
switch. For this session, go to the next step.
SELECT FONT
Note
The last lowercase letter "p" or "s" indicates the primary or secondary font
setting mode. If you select the secondary font setting mode, the display
shows "s" in the following messages.
s
Set the secondary font.
s
Set the symbol set.
s
Print the code table.
Exit
p
or