Milwaukee MW306 MAX Instruction Manual page 43

2. Press RCL then RANGE/ to select the "EXPORT ALL" option.
3. Press GLP/ACCEPT to confirm.
LCD displays "EXPORTING" and the percentage counter,
followed by "DONE" when export is completed. Display returns
to the lot selection screen.
Note: The USB drive can be safely removed if the USB icon is not
displayed. Do not remove the USB drive during export.
Overwriting existing data:
1. When the LCD displays "OVR" with LOT### blinking (USB icon
is displayed), an identical named lot exists on the USB drive.
2. Press keys to select between YES, NO, YES ALL, NO ALL
(ACCEPT tag blinking).
3. Press GLP/ACCEPT to confirm. Not confirming exits the export.
Display returns to lot selection screen.
USB Export Selected
Logged data can be transferred separately by lots.
1. Press RCL to access the logged data.
LCD displays "PLEASE WAIT" followed by "LOG RECALL" with
ACCEPT tag blinking and the number of stored logs.
2. Press GLP/ACCEPT to confirm.
3. Use  keys to select the lot type (MANUAL, STABILITY or
interval ###)
4. With the lot selected, press RANGE/ to export to USB drive.
LCD displays "PLEASE WAIT" followed by "EXPORTING" with
ACCEPT tag and selected lot name (MAN / STAB / ###)
blinking. LCD displays "EXPORTING" and the percentage
counter, followed by "DONE" when export is completed.
Display returns to the lot selection screen.
Note: The USB drive can be safely removed if the USB icon is not
displayed. Do not remove the USB drive during export.
LOGGING 43