Milwaukee MW306 MAX Instruction Manual page 17

EC Range
Options: AUTO (default), 29.99 S/cm, 299.9 S/cm, 2999 S/cm,
29.99 mS/cm, 200.0 mS/cm
Note: Absolute conductivity — up to 500.0 mS/cm — is the
conductivity value without temperature compensation.
With the probe connected, use  keys to change the value.
When autoranging, the meter automatically chooses the optimum
conductivity range to maintain the highest possible accuracy.
Note: Selected EC range is active during measurements only.
If exceeded, the full-scale value is displayed blinking. Logged
data is displayed in S/cm in the CSV files.
TDS Range
Options: AUTO (default), 14.99 mg/L, 149.9 mg/L, 1499 mg/L,
14.99 g/L, 100.0 g/L
Note: Absolute TDS — up to 400.0 g/L (with 0.8 factor) — is the
TDS value without temperature compensation.
With the probe connected, use  keys to change the value.
When autoranging, the meter automatically chooses the optimum
TDS range to maintain the highest possible accuracy.
SETUP 17