Milwaukee MW306 MAX Instruction Manual page 41

6. Press GLP/ACCEPT to confirm (to exit, press ESC or CAL/EDIT
or LOG/CLEAR).
"PLEASE WAIT" with ACCEPT tag blinking is displayed, until
the lot is deleted. After the lot has been deleted "CLEAR DONE"
message displays briefly. Display shows the previous lot ###.
Delete All
1. Press RCL to access the logged data.
LCD displays "PLEASE WAIT" followed by "LOG RECALL" with
ACCEPT tag blinking and the number of stored logs.
2. Press LOG/CLEAR to delete all logs.
"CLEAR ALL" is displayed with ACCEPT tag blinking.
3. Press GLP/ACCEPT to confirm (to exit, press ESC or CAL/EDIT;
or LOG/CLEAR).
"PLEASE WAIT" is displayed with a percentage counter, until
all logs are deleted. After all logs have been deleted "CLEAR
DONE" message displays briefly. Display returns to the log
recall screen.
LOGGING 41