Setup; Setup Options - Milwaukee MW306 MAX Instruction Manual

14 MW

7. SETUP

To configure the meter settings, modify default values or set
measurement parameters:
y Press SETUP to enter (or exit) Setup mode
y Use  keys to navigate the menus (view parameters)
y Press CAL/EDIT to enter Edit mode (modify parameters)
y Press RANGE/ key to select between options
Use  keys to modify values (value being modified is
displayed blinking)
y Press GLP/ACCEPT to confirm and save changes (ACCEPT tag
is displayed blinking)
y Press ESC (or CAL/EDIT again) to exit Edit mode without
saving (return to menu)

7.1. SETUP OPTIONS

Log Type
Options: INTERVAL (default), MANUAL or STABILITY
Press RANGE/ to select between options.
Use  keys to set time interval: 5 (default), 10, 30 sec. or 1, 2, 5,
15, 30, 60, 120, 180 min.
Use  keys to select stability type: fast (default), medium or
accurate.
Portable Meter