Milwaukee MW306 MAX Instruction Manual page 40

40 MW
Individual Logs / Records
1. Press RCL to access the logged data.
LCD displays "PLEASE WAIT" followed by "LOG RECALL" with
ACCEPT tag blinking and the total number of logs.
2. Press GLP/ACCEPT to confirm.
3. Use  keys to select MANUAL or STABILITY lot type.
4. Press GLP/ACCEPT to confirm.
5. Use the  to navigate between logs. Log record number
displays on the left.
6. With desired log record selected, press LOG/CLEAR to delete.
"DELETE" is displayed with ACCEPT tag and log ### blinking.
7. Press GLP/ACCEPT to confirm (to exit, press ESC or CAL/EDIT
or LOG/CLEAR). "DELETE" and Log ### blinking is displayed,
until the log is deleted. After the log has been deleted
"CLEAR DONE" message displays briefly.
Display shows logged data of the next log ###.
Note: Logs stored within an interval lot can not be deleted
individually.
Log on Interval
1. Press RCL to access the logged data.
LCD displays "PLEASE WAIT" followed by "LOG RECALL" with
ACCEPT tag blinking and the total number of logs.
2. Press GLP/ACCEPT to confirm.
3. Use  keys to select an interval logging lot number.
The LOG ### LOT ### screen displays selected lot number
(bottom right) and total logs stored in lot (bottom left).
4. Press GLP/ACCEPT to confirm (to exit, press ESC or CAL/EDIT
or LOG/CLEAR).
5. With the lot selected, press LOG/CLEAR to delete entire lot.
"CLEAR" is displayed with ACCEPT tag and lot name blinking.
Note: Use  keys to select a di erent lot number.
Portable Meter