Dialing Options; One Touch Dialing; Speed Dialing - Brother MFC-7300C Owner's Manual

Dialing Options

You can use your MFC to make voice telephone calls, by dialing manually, or
by using Search, One Touch or Speed Dial memory. When you dial an auto dial
number, the screen displays the name you've stored, or, if you haven't stored a
name, the fax number you've stored.

One Touch Dialing

1
Pick up the handset.
2
When you hear a dial tone, press the One Touch key of the location you will
want to call. (See
3
To hang up, replace the handset.
If you try to use a One Touch location with no number stored in it, you will hear
a warning sound, and the LCD will display NOT REGISTERED for 2 seconds.
If you are sending a fax, press Start after pressing the One Touch key. If you
Note
picked up the handset, press Start when the receiving fax machine answers
with fax tones.

Speed Dialing

1
Pick up the handset.
2
When you hear a dial tone, press Search/Speed Dial, press #, then press the
two-digit Speed Dial location. (See
3
To hang up, replace the handset.
If you are sending a fax, press Start after entering the Speed Dial number. If
Note
you picked up the handset, press Start when the receiving fax machine
answers with fax tones.
8 - 5
A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S
Storing One Touch Dial Numbers
Storing Speed Dial Numbers
, page 8-1.)
, page 8-2.)