Changing Default Copy Settings - Brother MFC-7300C Owner's Manual

Changing Default Copy Settings

Press Function, 3 to change default settings for Copy mode. These settings
will remain until you change them again by pressing Function. Adjust the
colors using the Color Adjustment, Brightness, and Contrast settings.
By pressing a number, you can adjust copy settings as shown in the following
chart. Press
to save your selection. Press Stop to exit—OR—Press
setting you want to change.
Press Function, and 3.
1.PAPER TYPE
2.QUALITY
3.COLOR ADJUST
4.CONTRAST
5.ONE COLOR
to scroll through the options for each setting. Press Set
or
PAPER:PLAIN
PAPER:INK JET
PAPER:GLOSSY
PAPER:PHOTO
PAPER:TRNSPRNCY
QUALITY:HIGH
QUALITY:NORMAL
QUALITY:DRAFT
QUALITY:PHOTO
COLOR:RED
COLOR:GREEN
COLOR:BLUE
–
COLOR:OFF
COLOR:CYAN
COLOR:MAGENTA
COLOR:YELLOW
to select the next
INK JET:BROTHER
INK JET:OTHER
R: –
G: –
B: –
+
M A K I N G C O P I E S
+
+
+
is default
11 - 6