Sending Faxes With Multiple Settings; Resolution; Contrast - Brother MFC-7300C Owner's Manual

Sending Faxes with Multiple Settings

When you send a fax you can choose any
combination of the available settings:
add a coverpage and select a comment;
set the contrast or resolution; send using
overseas mode, call reservation, delayed
fax, polling transmission or real time transmission. After each function is
accepted, the display will ask if you want to enter other settings:
Press 1 if you want to select additional settings. The display returns to the
SETUP SEND menu—OR—
Press 2 if you are finished choosing settings, and go to the next step.

Resolution

When you have an original in the ADF, you can use the Resolution key to
change the default setting. Press Resolution continuously until you see the
lights change to the setting you want. For standard, turn Fine & Photo lights off.
(See Multiple Resolution Transmissions, page 7-11.)
Standard—For most typed documents. (No lights)
Fine—Good for small print; transmits slower than standard resolution.
Photo—Use when document has varying shades of gray; slowest transmission
time.
Color fax—Use to send the original in color.
You can also change the fax resolution to S.Fine. Please see Multiple
Note
Resolution Transmission, page 7-11.

Contrast

If your original is very light or very dark, you might want to set the contrast
accordingly. Use S.LIGHT to send a very light original. Use S.DARK to send a
very dark original.
1
Place the original face down in the ADF.
2
Press Function, 1, 3, 3.
3
Press
or
4
Press 1 if you want to select additional settings. The display returns to the
SETUP SEND menu—OR—Press 2 if you are finished choosing settings and
go to step 5.
5
Enter a fax number
6
Press Start to send a fax.
to select AUTO, S.LIGHT or S.DARK and press Set.
ACCEPTED
OTHER SETTINGS?
1.YES 2.NO
S E T U P S E N D
7 - 2