Table of Contents
Advertisement
2
Product Description
6
2.1
Important Features
•
The supporting air and the vacuum as well as the speed of the cylinder are adjustable. That way the applicator
can be adapted to different label materials and sizes.
•
To avoid contamination within the vacuum channels they are cleaned by air pressure impulse at the end of each
application.
•
For operation in a system the I/O interface of the printer can be used.
2.2
Technical Data
Label transfer method
Label width
in mm for
Label height
in mm for
Compressed air pressure
Sound pressure level
Product during
labeling
Labeling onto the
product
Product height
Horizontal short
stroke cylinder
Product distance to lower edge
at cylinder stroke
Immersion depth pad
Cycle time about frequency/min.
Table 1
Technical Data
1)
Determined at 100 mm stroke below device / smallest label height / print speed 100 mm/s .
Immersion depth at applicator >25 mm, the cover of the Hermes + must be modified.
2)
HERMES Q2
HERMES Q4
HERMES Q2
HERMES Q4
fixed
from the top
from below
sideways
variable
x-direction
y-direction
200 mm up to mm
300 mm up to mm
400 mm up to mm
2)
up to mm
1)
Tamp pad
Tamp pad
with foam
4414 L/R 11 F
4414 L/R 12 F
4 - 58
10 - 58
10 - 114
10 - 114
4 - 80
8 - 80
8 - 80
8 - 80
0,45 MPa (4,5 bar)
under 74 dB(A)
¢
¢
¢
¢
¢
3 - 7
3 - 7
11 - 15
11 - 15
135
135
235
235
335
335
90
90
25
25
Tamp pad
with label stop
4414 L/R 61 F
10 - 58
10 - 114
4 - 80
8 - 80
¢
¢
¢
¢
¢
¢
¢
¢
¢
¢
3 - 7
11 - 15
135
235
335
90
25
6
Advertisement
Table of Contents
