Table of Contents
Advertisement
1
Introduction
4
1.1
Instructions
Important information and instructions in this documentation are designated as follows:
Danger!
Draws attention to an exceptionally great, imminent danger to your health or life due to hazardous
voltages.
Danger!
!
Draws attention to a danger with high risk which, if not avoided, may result in death or serious injury.
Warning!
!
Draws attention to a danger with medium risk which, if not avoided, may result in death or serious injury.
Caution!
!
Draws attention to a danger with low risk which, if not avoided, may result in minor or moderate injury.
!
Attention!
Draws attention to potential risks of property damage or loss of quality.
i
Note!
Advice to make work routine easier or on important steps to be carried out.
Environment!
Gives you tips on protecting the environment.
Handling instruction
Reference to section, position, illustration number or document.
Option (accessories, peripheral equipment, special fittings).
Time
Information in the display.
1.2
Intended Use
•
The device is manufactured in accordance with the current technological status and the recognized safety rules.
However, danger to life and limb of the user or third parties and/or damage to the device and other tangible assets
can arise during use.
•
The device may only be used for its intended purpose and if it is in perfect working order, and it must be used with
regard to safety and dangers as stated in the manual.
•
The device is designed to use on a cab printer of the HERMES Q series. Any other use or use going beyond
this shall be regarded as improper use. The manufacturer/supplier shall not be liable for damage resulting from
unauthorized use; the user shall bear the risk alone.
•
Usage for the intended purpose also includes complying with the manual, including the manufacturer's mainte-
nance recommendations and specifications.
i
Note!
The complete and current version of the documentation can be found in the Internet.
1.3
Safety Instructions
!
Attention!
Initiation, adjustments and changing of parts are to be performed by qualified service personnel only.
Warning!
!
This is a class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
Before mounting the delivered components disconnect the printer from the power supply and close the shutoff
•
valve of the applicator.
•
Only connect the device to other devices which have a protective low voltage.
4
Advertisement
Table of Contents
