Configuration
7
The applicator can be operated in different ways. While the original process stays the same, the operation mode can
be chosen from within the printer setup.
The most important setting is the selection between the operation modes "Stamp on" and "Blow on".
Additionally the applicator has different application modes concerning the order of printing and applying within one
labelling cycle
Print/Apply
Apply/Print
Waiting position up
Apply/Print
Waiting position down
Table 3
Operation and application modes
Additionally all operating modes can be adjusted by setting different time delays.
i
Note!
For more information about the printer configuration and the function of the buttons in the navigator pad
Configuration manual of the printer or Operator's manual of the printer
7.1
Method for Changing the Printer Setup
1. Press menu button.
2. Menu
3. Select and adjust the needed parameters.
4. Return to the "Ready" mode.
Setup>
Labelling >
Stamp on
Blow on
x
x
-
x
x
x
31