NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
Steps
1. Align the screw holes on the display hinges and brackets with the screw holes on the display back-cover and antenna
assembly.
2. Replace the eight screws (M2x2) that secure the display-hinge brackets to the display back-cover and antenna assembly.
122
Replacing the display hinges
Replacing the display hinges
computer. After working inside your computer, follow the instructions in
53
After working
www.dell.com/