Checking The Chain Tension - Husqvarna SVARTPILEN 401 Owner's Manual

12.22

Checking the chain tension

Warning
Danger of accidents Incorrect chain tension damages components and results in accidents.
If the chain is tensioned too much, the chain, engine sprocket, rear sprocket, transmission and rear
wheel bearings wear more quickly. Some components may break if overloaded.
If the chain is too loose, the chain may fall off the engine sprocket or the rear sprocket. As a result, the
rear wheel locks or the engine will be damaged.
–
Check the chain tension regularly.
–
Set the chain tension in accordance with the specification.
SERVICE WORK ON THE CHASSIS 12
Preparatory work
–
Raise the motorcycle with the rear lifting gear. (
Main work
–
Shift the transmission into neutral.
–
In the area after the chain sliding guard, press the chain
upward toward the link fork and measure chain tension
Info
Top chain section
Chain wear is not always even, so you should repeat
this measurement at different chain positions.
M00714-10
p. 124)
B
must be taut.
A
.
155