Table of Contents
Advertisement
9 RIDING INSTRUCTIONS
98
–
Pull clutch lever and shift into a lower gear, release the clutch
lever slowly, and open the throttle or shift again.
–
Switch off the engine if running at idle speed or stationary for
a long time.
–
After reaching maximum speed by fully opening the throt-
tle grip, turn the throttle back so it is ¾ open. This will barely
reduce the speed, but fuel consumption will be considerably
lower.
–
Accelerate only up to a speed suitable for the road surface
and weather conditions. Particularly in bends, do not shift,
and accelerate very carefully.
–
If the engine stalls (e.g. at an intersection), just pull the clutch
lever and press the start button. The transmission must not
be shifted into neutral.
–
If the malfunction indicator lamp
stop immediately (taking care not to endanger yourself or
other road users in the process), switch off the engine, and
contact an authorized Husqvarna Motorcycles workshop.
–
If the general warning symbol begins to flash in the display
during the trip, several warnings have been detected.
Info
Warnings which have occurred are shown and saved
in the Info display until these are no longer active.
lights up during a trip,
Advertisement
Table of Contents
