Table of Contents
Advertisement
–
Remove screws
–
Take off handlebar clamp
to one side and secure.
Info
Cover the components to protect them against dam-
age.
Do not kink the cables and lines.
–
Remove screws
4
port
.
–
Position washers
–
Place the handlebar support
Info
The handlebar support is longer and higher on one
side. This side is marked with marking
–
Mount and tighten screws
E01148-11
Guideline
Screw, handlebar
support
TUNING THE CHASSIS 11
1
.
2
. Take off the handlebar, place
3
6
with nuts
. Remove handlebar sup-
5
.
4
in the required position.
3
6
with nuts
.
M10
21 Nm (15.5 lbf ft)
A
.
121
Advertisement
Table of Contents
