Adjusting Abs Mode - Husqvarna SVARTPILEN 401 Owner's Manual

7 COMBINATION INSTRUMENT
7.15
78

Adjusting ABS mode

H03974-01
Condition
The motorcycle is stationary.
–
Press the MODE button briefly and repeatedly until ABS
appears on the display.
–
Keep the SET button pressed for 3-5 seconds to change
between ABS modes.
Info
Do not open the throttle during the selection.
If switching ABS mode was unsuccessful, the previ-
ously set ABS mode will remain active.
A flashing ABS mode indicates that the ABS mode
displayed does not match the actual ABS mode of the
ABS due to a malfunction.
If the ABS mode ROAD is enabled, ABS controls both
wheels.
If the ABS mode SUPERMOTO is enabled, ABS only
controls the front wheel. The rear wheel is not con-
trolled by ABS and may lock during braking maneu-
vers.