Husqvarna SVARTPILEN 401 Owner's Manual page 99

Note
Transmission damage Incorrect use of Easy Shift will damage the transmission.
Easy Shift is not active if you pull the clutch lever.
–
Only use Easy Shift in the permitted speed range shown.
Info
If unusual noises occur while riding, stop immediately (taking care not to endanger yourself or other road
users in the process), switch off the engine, and contact an authorized Husqvarna Motorcycles work-
shop.
–
Shift into a higher gear when conditions allow (incline, road
situation, etc.).
–
Release the throttle while simultaneously pulling the clutch
lever, shift into the next gear, release the clutch lever, and
open the throttle.
Info
You can see the positions of the 6 forward gears in
the figure. The idle position is between the first and
401950-11
second gears. First gear is used for starting off or for
steep inclines.
–
Brake if necessary and close the throttle at the same time in
order to shift down.
RIDING INSTRUCTIONS 9
97