Service And Calibration; Service S/W - LG MG200 Service Manual

Table of Contents

6. SERVICE AND CALIBRATION

6.1.1 Overview

This service S/W is used for Calibration and Standalone test.

6.1.2 Hardware and Software Environment

• More than 486 computer

• 16Mbyte RAM

• Remained more than 10Mbyte in Hard Disk Memory

• Under Microsoft window 98 or more than

6.1.3 Software Installation

Unzip the phones service software provided where slide you want there are some files extracted

in that slide. Start Setup.exe in Service software setup slide. GS2USramp.dat, default transmit

ramping table, and GS2US.epm, default calibration data, are located in window system slide so

that these files are loaded automatically, if you execute LaputaService.exe.

6.1.4 Common Properties of Service Software

When you execute this program, you°Øll see the below user interface window titled

LAPUTA_Service Tool in figure 7-1. The LAPUTA_Service Tool has five main frames.

- 99 -

Table of Contents