Service And Calibration; Service S/W; Overview; Hardware And Software Environment - LG T5100 Service Manual

7. Service and Calibration

7.1 Service S/W

7.1.1 Overview

This service S/W is used for Calibration and Standalone test.

7.1.2 Hardware and Software Environment

·
More than 486 computer
·
16Mbyte RAM
·
Remained more than 10Mbyte in Hard Disk Memory
·
Under Microsoft window 98 or more than

7.1.3 Software Installation

Unzip the phones service software provided where slide you want there are some files extracted in
that slide. Start Setup.exe in Service software setup slide. RampTable.dat, default transmit ramping
table, and rf_original_L300.epm, default calibration data, are located in window system slide so that
these files are loaded automatically, if you execute LaputaService.exe.

7.1.4 Common Properties of Service Software

When you execute this program, you'll see the below user interface window titled
LAPUTA_Service Tool in figure 7-1. The LAPUTA_Service Tool has five main frames.
- 113 -
7. Service and Calibration