Perform A Media Registration For Large Media - Adjust The X-Position Of Side 2 - Canon Oce VarioPrint 6000+ Series Operation Manual

Perform a media registration for large media - Adjust the X-position of side 2

Perform a media registration for large media - Adjust the X-
position of side 2
Procedure
1. Take the first test sheet.
2.
Align the start of the ruler with point 'N' of the test sheet.
N
[37] Align the ruler with 'N'
3. Read the value at the edge of the test sheet.
4. Enter the value.
5. Take the second test sheet.
6.
Repeat the steps 2 - 4.
7.
Take the third test sheet.
8.
Repeat the steps 2 - 4.
Result
A pop-up message appears. The message asks you whether you want to print an extra test sheet
to verify the result of the registration. You can do one of the following.
• Press [Yes] if you want to print an extra test sheet to verify the result.
Wait for the sheet and check the result. Another pop-up message appears. Press [Yes] if the
registration is correct. Press [No] if the registration is not correct. Then the registration
procedure will start again.
• Press [No] if you do not want to print an extra test sheet. The registration procedure will be
finished.
78 Chapter 6 - Media handling
K
Test bitmap: REGISTRATION
Size: 420 x 297 mm
2006-10-09 / 14:08:22
Page 2
2 Secondary image
L M N
P