Canon Oce VarioPrint 6000+ Series Operation Manual page 41

Setting Values
[Offset stacking] [Jobs]
[Sets (always)]
[Sets (as in job)]
[Banners]
[Off]
Effect
Each printed job that is delivered to an output location is
stacked on top of the previous printed job with an offset.
This helps you to identify the various jobs.
The offset stacking is defined per N sets. By default, this
number is 1. If a number is specified, this specified num-
ber of printed sets of a job will be delivered to an output
location in one straight stack, the next number of printed
sets are stacked with an offset. When the number of re-
quested sets in a job is lower than or equal to N, the sets
are not stacked with an offset. However, the whole job is
stacked with an offset with respect to the previous job.
Each printed set is delivered to the output location as in-
dicated in the job ticket. Therefore, the sets can be
stacked in one straight line or with an offset.
Each banner page of a job is delivered to the output lo-
cation with an offset. This helps you to identify the sepa-
rate jobs. The jobs themselves are stacked in one
straight line.
All the printed jobs or sets are stacked in one straight
line. There is no offset between the jobs or sets.
Chapter 5 - Adapt printer settings to your needs
Work with the workflow profiles
41