Canon Oce VarioPrint 6000+ Series Operation Manual page 172

Main parts
Description of the main parts
Description of the main parts
Part
1 Bypass
2 Punch path
3 Die set
4 Chip tray
5 Storage area for die
sets
6 Power switch
172 Chapter 10 - Optional finishers and other devices
Description
The bypass is a short straight-through paper path for docu-
ments that must not be punched.
Documents that must be punched follow the U-shaped punch
path. The puncher can handle media up to 216 g/m² (80 lb.
cover).
The puncher can use many different die sets (see
summary on page
173). The various die sets make different
types of holes in your documents for different types of bind-
ing. You do not need tools or levers to replace a die set (see
Replace a die set on page
The chip tray collects the paper chips that arise from the
punching process. You can easily access and empty the chip
Empty the chip tray on page
tray (see
The storage area K6 inside the puncher can keep 3 die sets.
The power switch turns the puncher on and off. The punch-
er can only operate when the power switch
tion.
175).
174).
is in the 'I' posi-
Die set