Canon Oce VarioPrint 6000+ Series Operation Manual page 34

Change a number of settings in the Settings Editor via the operator panel
Group of settings
[Logging]
[Connectivity]
[Remote connection]
(optional)
34 Chapter 5 - Adapt printer settings to your needs
Available settings
• [Save the data-
dump file]
• [Save the trace file]
• [Print the configura-
tion report]
• [MAC address]
(read-only)
• [Host name]
• [Link speed and
connection type]
• IPv4 settings
• IPv6 settings
• DNS settings
• WINS settings
• [Test the TCP/IP
connection]
• [Remote connection
status] (read-only)
• [Remote connection
enabled]
• [Remote Service
country code]
• [Test Remote con-
nection]
Short description
When an error occurs, the help desk of your
printer supplier can ask you to create and send
a trace file and a datadump file. The datadump
file is a .zip file that contains detailed technical
information about your system. Furthermore,
the system can store trace log files in .zip files.
You can save both .zip files to a USB drive.
The configuration report contains information
about the configuration of your printing sys-
tem, for example information about the sys-
tem configuration, controller configuration and
network settings. You can print the configura-
tion report for backup purposes, for example.
Follow the instructions on the operator panel
when you save a file or print a report.
The [Connectivity] section contains the main
settings to integrate the printer into a network.
After you have adapted the network settings,
you can test the connection from here.
Follow the instructions on the operator panel
when you adapt the network settings.
The [Remote connection] section (optional)
contains the settings to enable the remote con-
nection and to configure the Remote Service.
Remote Service on page
See also
NOTE
Only Service can adapt the remote
connection settings. After Service
adapts the remote connection set-
tings, you can test the remote con-
nection with this setting.
164.
4