Canon Oce VarioPrint 6000+ Series Operation Manual page 21

Component
6 Puncher (optional)
7 Stacker
8 Finisher (optional)
Introduction to the main system components
Function
The puncher (iXDP) can make holes in the prints. The
number of holes depends on the die set that is installed
(see Replace a die set on page
The stacker is the output location of a default configura-
tion. The system supports up to 3 stackers (see
put locations on page
The finisher on top of the stacker is an optional output
location for the print jobs. The finisher can staple the
The output locations on page
jobs (see
175).
29).
29).
Chapter 4 - Main parts
The out-
21