Canon Oce VarioPrint 6000+ Series Operation Manual page 27

Number Description
3 When the check mark is green, the media in the paper tray is defined. The
system knows which media is in the paper tray.
4 When the arrows are red, the media in the paper tray is not defined. The
system does not know which media is in the paper tray. The [Trays] view on
the operator panel indicates that no media is assigned to the paper tray.
5 The [Not assigned] button. This button applies to the paper tray where you
just put the media.
You can press the [Not assigned] button when you load a new media type
into a paper tray without defining this media type on the operator panel
first. Then the printer cannot accidentally use the media in this paper tray
before the media is correctly defined on the operator panel. You can define
the media type in the [Trays] view on the operator panel later (see
the media to a paper tray on page
NOTE
Make sure that the paper tray is open when you press the [Not as-
signed] button.
59).
Chapter 4 - Main parts
The paper modules
Assign
27