Canon Oce VarioPrint 6000+ Series Operation Manual page 98

Description of the print job settings
Setting
[Punching]
[Binding]
Settings for the whole job
Setting
[Job name]
[Number of
sets]
98 Chapter 7 - Carry out print jobs
Values Description
Here you can define the amount and location of the punch
holes.
[None]
[2 holes]
[3 holes]
[4 holes]
[Die set de-
pendent]
Location
• [Left]
• [Top]
• [Right]
• [Bottom]
[None] Here you can define the required number of staples. Further-
more you can define where you want the staples with the
[Location] option.
The available locations for the 1 staple option:
[1 staple]
• [Top left]
• [Top right]
• [Bottom left]
• [Bottom right]
[2 staples]
The available locations for the 2 staples option:
• [Left edge]
• [Top edge]
• [Bottom edge]
• [Right edge]
Check the preview for the result of the selection.
Values Description
Displays the job name of the print job. You can change the
job name of a print job.
Use this setting to define the number of copies. You can en-
ter a value from 1 - 65,000. The default value is 1.
4