Make An Intermediate Check Print - Canon Oce VarioPrint 6000+ Series Operation Manual

Make an intermediate check print

Make an intermediate check print
Introduction
The machine has a function that enables you to make a check print while a job is printed. This
function is called the intermediate check print. When you use this function, the machine prints a
copy of the sheet that is printed at the moment you press the [Intermediate check print] button.
You can use this sheet to check whether the quality and consistency of the prints still meet your
requirements.
This section describes how to make an intermediate check print.
NOTE
You can also press the [Intermediate check print] button when a job has not yet started. As soon
as you start printing, a copy of the first sheet of the job will be printed.
NOTE
In the Settings Editor, you can also set the [Interval of intermediate check print].
[12] Make an intermediate check print
Procedure
1.
On the operator panel, press the [System] button.
2.
Press [Setup].
3. Touch the [Intermediate check print] button in the [Advanced] section.
The intermediate check print is sent to the system output (see
42 Chapter 5 - Adapt printer settings to your needs
The output locations on page
29).