2. Scroll down and select Error Log Reset.
3. Select the Test softkey which opens the Error Log Reset page.
4. Select Start to clear the Error Log.
5. Verify that all error codes have been cleared from the Error Log, from the Home page,
select Settings > Information > Error Log.
R20 Error Log Information
Accessing the Error Log
The Error Log is accessed from the Information Display (65).
1. Access the Information Display (65), scroll to the Error Log item and press the GO control
to select.
Note: Use the left/right arrow keys to scroll through the menu items.
Any logged error codes will be listed until cleared. The error codes will be sequentially listed
from the most recent to the oldest. When the Error Log reaches maximum storage capacity,
the newest error code will push the oldest error code off the stack.
Each logged error code will include the following information:
•
an assigned index number
•
the error code number
•
the machine usage mileage when the event occurred
•
the machine usage time when the event occurred
Note: Use the left/right arrow keys to scroll through the list of error codes.
If there are no logged error codes, the message "0 ERRORS" will be shown.
©2014 Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Page 34 of 56