Table of Contents
Advertisement
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band
Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS
Ports, and USB Port
User Manual
In order to connect your device to a private Ethernet line, on the Device mode page, from the
Connection method list, select the Ethernet (LAN) value. Then from the Work mode list
select the Router value. In this mode you can configure a WAN connection, set your own settings
for the wireless network in the 2.4GHz and 5GHz bands, configure LAN ports to connect an STB or
VoIP phone, and set your own password for access to the web-based interface of the device.
In order to connect your device to the network of a 3G or LTE operator, on the Device mode
page, from the Connection method list, select the Mobile Internet value. In this mode you can
configure a 3G/LTE WAN connection, set your own settings for the wireless network in the 2.4GHz
and 5GHz bands, and set your own password for access to the web-based interface of the device.
Figure 36. Selecting an operation mode. The Mobile Internet mode.
Figure 35. Selecting an operation mode. The Router mode.
Page 53 of 311
Configuring via Web-based Interface
Advertisement
Table of Contents
