D-Link DVG-5402G User Manual page 247

DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band
Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS
Ports, and USB Port
User Manual
Parameter
Enable T.38 support
Port
Fax/Modem
determination
Enable custom
parameters
Maximal buffer
Rate management (TCF)
Maximal rate
Error correction mode
Enable spoofing
Duplicate number
T.38
Move the switch to the right to allow support of the T.38 protocol. If
the switch is moved to the right, the Port field, the Fax/Modem
determination drop-down list, and the Enable custom
parameters switch are displayed on the page.
The router's port for data transfer via T.38.
From the drop-down list, select a mode of fax/modem signal
detection.
Move the switch to the right to specify additional parameters for
T.38 protocol. Upon that the Custom Parameters T.38 section is
displayed on the page.
Custom Parameters T.38
The maximum buffer size (in bytes) for data received by the router.
From the drop-down list, select a method for facsimile data transfer
rate management: Local or Network.
From the drop-down list, select the maximum rate for facsimile data
receipt/transfer (in bauds).
Move the switch to the right to enable the error correction mode.
When the switch is moved to the right, the ECC signal and ECC
data fields are available for editing.
Move the switch to the right to let the router simulate facsimile data
receipt/transfer in case of delays.
Specify the number of packet duplications.
Page 247 of 311
Configuring via Web-based Interface
Description