Table of Contents
Advertisement
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band
Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS
Ports, and USB Port
User Manual
Parameter
Bound interface name
Local SIP port
In the Profile list section, the list of existing profiles with their status is displayed.
To create a new profile, click the ADD button (
In the opened window, you can specify the following parameters:
Parameter
Enable
Enable DHCP option
120
Name
When all needed settings are configured, click the SAVE button.
To edit an existing profile, in the Profile list section, select the relevant line in the table. In the
opened window, change the needed parameters and click the SAVE button.
A connection or a group interfaces of the router for VoIP. Select the
needed value from the drop-down list. The field is displayed if the
Connection value is selected from the Interface type drop-down
list, or if the WAN group value is selected and there are several
NAT interface groups created on the router. You can create groups
consisting of interfaces and ports of the router on the Advanced /
Interface Grouping page
page 201).
A port of the router for outbound SIP traffic. Unless another setting
is given by your ISP, it is recommended to leave the default value
(5060).
Figure 175. The window for adding a profile.
Move the switch to the right to enable the profile.
Move the switch to the right to disable the profile.
Move the switch to the right to allow using DHCP option 120.
Move the switch to the left if your provider does not require
automatic obtainment of the SIP proxy server address.
The name of the profile for easier identification. You can specify any
name.
Page 225 of 311
Configuring via Web-based Interface
Description
(see the Interface Grouping section,
).
Description
Advertisement
Table of Contents
