Table of Contents
Advertisement
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band
Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS
Ports, and USB Port
User Manual
Client
On the Wi-Fi / Client page, you can configure the router as a client to connect to a wireless access
point or to a WISP. To configure the 2.4GHz band or 5GHz band, go to the relevant tab.
To configure the router as a client, move the Enable switch to the right. Upon that the following
fields are displayed on the page:
Parameter
Broadcast wireless
network 2.4 GHz /
Broadcast wireless
network 5 GHz
Connecting to network
Figure 126. The page for configuring the client mode.
If the switch is moved to the left, devices cannot connect to the
router's WLAN. Upon that the router can connect to another access
point as a wireless client.
A method for connecting to another access point.
Page 162 of 311
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
