DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band
Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS
Ports, and USB Port
User Manual
You can specify the following parameters:
Parameter
Enable
Name
IP address
Mask
Interface
Figure 113. The page for adding a GRE tunnel.
Move the switch to the right to enable the GRE tunnel.
Move the switch to the left to disable the GRE tunnel.
Tunnel settings
A name of the tunnel for easier identification. You can specify any
name.
The IP address of the GRE tunnel interface.
The mask of the subnet.
From the drop-down list, select a WAN connection through which
the tunnel will pass. Select the Default gateway value to use the
default WAN connection.
Page 139 of 311
Configuring via Web-based Interface
Description