Table of Contents
Advertisement
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band
Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS
Ports, and USB Port
User Manual
Parameter
Type
Click the APPLY button.
To edit an existing VLAN, select the relevant line in the table. On the page displayed, change the
parameters and click the APPLY button.
To remove an existing VLAN, select the checkbox located to the left of the relevant line in the table
and click the DELETE button (
!
Connection with the router may be interrupted, if you delete the VLAN that includes the
device port used to access the web-based interface of the router.
After specifying the needed VLAN parameters, go to the Connections Setup / WAN page to
create the required connections, then to the Advanced
created VLANS with the needed interfaces and WAN connections of the router for distinguishing
different types of
traffic.
Select a type for the port included in this VLAN.
Untagged: Untagged traffic will be transmitted through the
•
specified
port. The WAN port of the router can be included
in several VLANs as an untagged port.
Tagged: Tagged traffic will be transmitted through the
•
specified
port.
Leave the Excluded value for the ports not included in the VLAN.
).
Page 200 of 311
Configuring via Web-based Interface
Description
/ Interface Grouping page to group the
Advertisement
Table of Contents
