Udpxy - D-Link DVG-5402G User Manual

Wireless ac1200 mu-mimo dual band gigabit router with fiber wan port, 3g/lte support, 2 fxs ports, and usb port
Hide thumbs Also See for DVG-5402G:
Table of Contents

Advertisement

DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band
Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS
Ports, and USB Port
User Manual

UDPXY

On the Advanced / UDPXY page, you can allow the router to use the built-in UDPXY
application. The UDPXY application transforms UDP traffic into HTTP traffic. This application
allows devices which cannot receive UDP streams to access stream video.
To enable the application, move the Enable switch to the right.
Upon that the following fields are displayed on the page:
Parameter
Port
Maximum client number
Buffer size for incoming
data
Buffer size for data
transferred to client
WAN interface
After specifying the needed parameters, click the APPLY button.
Figure 170. The Advanced / UDPXY page.
The port of the router which the UDPXY application uses.
Maximum number of devices from the router's LAN which will be
served by the application.
Size of intermediate buffer for received data.
By default, the minimum acceptable value is specified.
Size of intermediate buffer for transmitted data.
By default, the minimum acceptable value is specified.
From the drop-down list, select a WAN connection which will be
used for operation with streaming video.
Page 219 of 311
Configuring via Web-based Interface
Description

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvg-5402gf

Table of Contents