DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band
Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS
Ports, and USB Port
User Manual
Figure 162. The window for changing the settings of the router's port.
In the opened window, specify the needed parameters:
Parameter
Speed
Data transfer mode.
Select the
Auto
value to enable autonegotiation.
selected, the Autonegotiation Modes and Flow control sections
are displayed.
Select the 10M-Half, 10M-Full, 100M-Half, or 100M-Full value
to manually configure speed and duplex mode for the selected port:
10M-Half: Data transfer in just
•
can be
either sent or
of up to 10Mbps.
10M-Full:
Data transfer in two directions simultaneously
•
(data can be sent and received at the same time)
maximum possible
100M-Half: Data transfer in just
•
can be
either sent or
of up to
100Mbps.
100M-Full:
Data transfer in two directions simultaneously
•
(data can be sent and received at the same time)
maximum possible
Page 209 of 311
Configuring via Web-based Interface
Description
one direction at a time
received) at the maximum possible
rate
of up to
10Mbps.
one direction at a time
received)
at the maximum possible
rate
of up to
100Mbps.
When this value is
(data
rate
at the
(data
rate
at the