Table of Contents
Advertisement
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band
Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS
Ports, and USB Port
User Manual
Parameter
Without authorization
Authentication protocol Select a required authentication method from the drop-down list.
Username
Password
Type
Figure 88. The page for creating a new Mobile Internet connection. The PPP section.
Parameter
MTU
Keep Alive
Dial on demand
Move the switch to the right if your operator does not require
authorization.
A username (login) to connect to the network of the operator.
A password to connect to the network of the operator.
Show icon (
) to display the entered password.
An IP version which will be used by this connection. Select the
IPv4, IPv6, or Dual value from the drop-down list.
PPP
The maximum size of units transmitted by the interface.
Move the switch to the right if you want the router to
connected to the network of your operator even when the
connection has been inactive for a specified period of time. When
the checkbox is selected, the LCP interval and LCP fails fields
are available. Specify the required values.
Move the switch to the right if you want the router to establish
connection to the Internet on demand. In the Maximum idle time
field, specify a period of inactivity (in seconds) after which the
connection should be terminated.
Page 109 of 311
Configuring via Web-based Interface
Description
Description
Click the
keep you
Advertisement
Table of Contents
