Table of Contents
Advertisement
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band
Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS
Ports, and USB Port
User Manual
Parameter
Option 82 Circuit ID
Option 82 Remote ID
Option 82 Subscriber ID
When all needed settings are configured, click the APPLY button.
In the DHCP Options section, you can change default values for some options of DHCP protocol
(IP address, subnet mask, DNS servers) or specify additional parameters which the built-in DHCP
server should send to clients to configure the local network.
Figure 94. Configuring the local interface. The IPv4 tab. The section for configuring DHCP options.
To do this, click the ADD button (
Figure 95. Configuring the local interface. The IPv4 tab. The window for configuring a DHCP option.
Available if the Fiber (SFP), Router, WISP Repeater, or
Mobile Internet mode was selected in the Setup Wizard.
The value of the relevant field of DHCP option 82. Do not fill in the
fields unless your ISP or the administrator of the external DHCP
server provided these values.
).
Page 117 of 311
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
