NEC Xen Master Programming Manual page 534

Hide thumbs Also See for Xen Master:

Table of Contents

NEC Business Solutions Pty Ltd

This option allows the technician to compare the configuration programmed in the

KTS with that of the PC.

First Initialisation

This option reinitialises the system to the factory-set defaults.

All active calls on the system are dropped.

Second Initialization

This option reboots the system without resetting the programmed defaults (i.e., all

programming is retained).

This option allows the technician to set up the system to provide communication.

Four options are available for this selection.

PC Serial Port — serial port of the PC that is connected to the KTS.

End User Password — the password programmed in Memory Block

17 on the KTS.

Site Name — the name of the site that is being programmed.

Setup & Initialize — the KTS port settings/configurations.

The Help pulldown menu allows access to online help.

This option provides access to the help topics window that describes how to use

the help function.

Figure 3-11 Help Menu

Xen Master & Xen Axis

PC Programming

Chapters

Table of Contents