NEC Xen Master Programming Manual page 30

NEC Business Solutions Ltd
LK 1 System Mode
LK 1 CO Line (Continued)
Data
Memory Block Name
No.
57 CO/PBX Prepause Timer Selection
59 Synchronous Ringing Selection
60 8-Digit Matching Table Assignment
61 8-Digit Matching Table to Class
Assignment
62 System Speed Dial Override by Class
Selection
63 Hold Recall Time Selection (Exclusive)
64 Attendant Add-On Console Transfer/
Camp-On Recall Timer Selection
65 Code Restriction Class Allow/Deny
Selection
66 8-Digit Matching Table to Normal Dial
Assignment
67 OCC Table Assignment
68 8-Digit Matching Table to OCC Table
Assignment
69 Tie Line Code Restriction Assignment
70 Code Restriction Class Assignment
when Lockout is Set
71 First Delay Announcement Start Time
Selection
72 First Delay Announcement Repeat
Selection
73 First to Second Delay Announcement
Interval Time Selection
74 Second Delay Announcement Repeat
Selection
75 Second Delay Announcement Repeat
Interval Time Selection
77 Delayed Ringing Timer Assignment
(CO)
78 Caller ID Display Assignment for
System Mode
1 - 12
Default Value
3 sec.
Yes
Refer to 8-Digit Matching Table Assignment on page 1-90.
Refer to 8-Digit Matching Table Assignment on page 1-90.
Override (YS)
1 min.
1 min.
Class 01 = Deny
Class 02 ~ 14 Allow
(YS)
Tables 00 ~ 15 = Used
Table 15 = Unused
Not Specified
Table 00~15 = All Not
Used
Table 16 = 00~14 Not
Used, 15 Used
(YS) Restriction
Class 01
20 sec.
1 Time
20 sec.
1 Time
20 sec.
15 sec.
Not Specified
Xen Master & Xen Axis
Programming Values
None, 1 sec. ~ 13 sec.
Yes, No
No = No Override
Yes = Override
0.5 min., 1 min., 1.5 min., 2 min., 3 min.,
5 min., 8 min., No Limit
0.5 min., 1 min., 1.5 min., 2 min., 3 min.,
5 min., 8 min., 10 min.
Allow, Deny
Used, Unused
0~9, *, X, P, N
8-digit Matching Table Used or Not Used
No = No Restriction
Yes = Restriction
Restriction Class: 00 ~ 15
0 sec., 10 sec., 20 sec., 30 sec., 40 sec.,
50 sec., 60 sec.
1, 2, 3, 4, 5, 6, 7, 8 times
0 sec., 10 sec., 20 sec., 30 sec., 40 sec.,
50 sec., 60 sec., No Limit
1, 2, 3, 4, 5, 6, 7, 8 times
0 sec., 10 sec., 20 sec., 30 sec., 40 sec.,
50 sec., 60 sec., No Limit
00 ~ 99
Combination No = 1~5
Selectable Tel No = 1~20
Multiline Terminal Programming