NEC Xen Master Programming Manual page 207

Programming Manual
External Speaker Chime Selection
General Description
Use this Memory Block to determine whether paging alert tone (4 tones) or alert chime
sounds before the speech path is established, or after, or before and after.
Display
Data
No.
0 8 : S P K
T I M E
Settings
LK 1 LK 2
PRT C-S
LK 5 LK 6
PRT = Normal Paging Tone Before the Page
C-S = Chime - Start Only (4 Tone Chime)
C-B = Chime - Both Start and End (4 Tone Chime)
Programming Procedures
1 Go off-line.
KH
2 Press LK1 + LK7 +
3 Press the corresponding CO/PBX line key to change the data option.
LK - On = Enabled
LK - Off = Disabled
N
4 Press to write the data.
P
5 Press to go back on-line.
Related Programming
M.B. Number
1-7-03
External Paging Alert Zone Selection
1-7-09 External Speaker Chime Start Time Selection
N
Memory Block 1-7-03 External Paging Alert Zone Selection must be enabled before this Memory Block has any affect.
External Speaker Chime Selection
Setting
Title Data
O N P R T
D I S P L A Y
LK 3 LK 4
C-B
The shaded area indicates the default setting.
LK 7 LK 8
to access the Memory Block.
Memory Block Name
May 2003
1-7-08
System Mode
1
Submode
7
Data No.
08
PC Programming
a
+BP
1 - 189