NEC Xen Master Programming Manual page 230

NEC Business Solutions Ltd
PC Programming Password
Assignment
General Description
Use this Memory Block to set a system password that must be entered when using PC
Programming.
Display
Data Class
No. No. 1
1 7 : ( 1 ) =
T I M E
Programming Procedures
1 Go off-line.
2 Press LK1 + LK8 + AG
3 Use the following to enter Class 1(Technician Mode) and password (8 dig
Note: Use the following to enter data:
K~I to enter numeric data
U
Press
N
4 Press to write the data.
P
5 Press to go back on-line.
Related Programming
No related programming is necessary for this Memory Block.
N
1. Programming from a Multiline Terminal allows eight digits to be entered for each class.
2. PC Programming allows only five digits to be entered; if more are entered, a "Password No Good" error is provided
when a login is attempted.
1 - 212
Setting
Data
D I S P L A Y
to access the Memory Block.
to clear data
its max):
Default Values
Class 1 Blank
PC Programming Password Assignment
Xen Master & Xen Axis
1-8-17
System Mode
1
Submode
8
Data No.
17
PC Programming
a
+CSP