NEC Xen Master Programming Manual page 307

Programming Manual
N
1. The Xen system divides the connections into the following patterns:
(Specify the sending and receiving levels of each pattern for each of the trunks.)
Pattern A (Intercom Mode)
Sending level
Receiving level
Pattern B (Tandem Mode)
Sending level
Receiving level
2. The Memory Block applies to Tie lines, T1, DID, and Basic Rate Interface (BRI) trunks.
Trunk Internal Transmit Pad Selection
Connections established between the intercom stations of the local
system and trunks.
(To be specified in this Memory Block.)
Connections established between two systems, with the local system
as a tandem system.
May 2003
1 - 289