NEC Xen Master Programming Manual page 259

Programming Manual
PRT B-Channel Map Assignment
General Description
Use this Memory Block to allocate the CO/DID trunks to the B Channel of the PRT(1)-
U13 ETU.
System Software version 5.0 or higher and PRT Firmware version 2.0 or higher
are required.
Data
PRT
No.
No.
0 1 / 0 5 : B
T I M E
Programming Procedures
1 Go off-line.
KE
2 Press LK1 + LK13 +
3 Use the following to enter data:
J to move the cursor left.
L to move the cursor right.
K ~ I to enter numeric data. (00~30, 00=Not Assigned)
N
4 Press to write the data.
P
5 Press To go back on-line.
N
1. Duplicate assignment (e.g., B1 and B2 both set to CH01) is not allowed except for 00.
2. B channels must be allocated in this Memory Block to ensure that correct B channels are used for incoming or
outgoing calls.
3. Refer to the following examples.
General Description Fractional Configuration Examples
1. The network provides B05~B12 when user subscribes 8 PRI channels.
CPU Side
CH 01
CH 08
PRT B-Channel Map Assignment
Setting
Setting Data B-
Title
Data CO
Channel
( 0 1 ) = 0 1
D I S P L A Y
to access the Memory Block.
Network Side
PRT
B5
∫
B12
}
B1
Unavailable
∫
B4
Fractional Subscription
}
B13
∫
Unavailable
B30
May 2003
1-13-05
System Mode
1
Submode
13
Data No.
05
PC Programming
a
+AN
1 - 241