NEC Xen Master Programming Manual page 198

NEC Business Solutions Ltd
Attendant Transfer Selection During
Live Record
General Description
This Memory Block controls the behavior of the Attendant DSS/BLF transfer while the
Attendant is engaged in a live recording operation. The call is either transferred to the DSS/
BLF extension or the voice mail box of the DSS/BLF extension. If Yes is selected, the call is
transferred to the DSS/BLF extension. If No is selected, the live record session is
addressed to that DSS/BLF extension (no transfer).
Display
Data
No.
0 8 : D S S
T I M E
Settings
LK 1 LK 2
No Yes
LK 5 LK 6
Programming Procedures
1 Go off-line.
2 Press LK1 + LK6. Use
3 Press the corresponding CO/PBX line key to change the data option.
N
4 Press to write the data.
P
5 Press to go back on-line.
Related Programming
No related programming is necessary for this Memory Block.
1 - 180
Setting
Data
Title
S E L Y S
D I S P L A Y
LK 3 LK 4
The shaded area indicates the default setting.
LK 7 LK 8
J
to move cursor to the second Data No. position and press
Xen Master & Xen Axis
PC Programming
H
to access the Memory Block.
Attendant Transfer Selection During Live Record
1-6-08
System Mode
1
Submode
6
Data No.
08
a
+BTD