Steps
1. Align the screw holes on the right system fan with the screw holes on the frame.
2. Replace the two screws (M2x3) to secure the right system fan to the frame.
3. Connect the right system fan FPC to the connector on the system board.
Next steps
1. Install the
display
assembly.
2. Install the
SIM
card.
3. Follow the procedure in
Volume button daughter board
Removing the Volume button daughter board
Prerequisites
1. Follow the procedure in
2. Remove the
SIM
tray.
3. Remove the
display
assembly.
4. Remove the
WWAN
card.
5. Remove the
left system
About this task
The following images indicate the location of the Volume button daughter board and provide a visual representation of the
removal procedure.
50
Removing and installing components
After working inside your
Before working inside your
fan.
computer.
computer.